SURECOM SW-102N V.S.W.R. METER +50W DUMMY LOAD

SURECOM SW-102N V.S.W.R. METER +50W DUMMY LOAD

  • $75.00


SW-102-UV Digital VHF/UHF Power & SWR Meter & Frequency counter 


V.S.W.R. meter Introduction

VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
All Funtion display ( Frequency counter ,Power watt , SWR ,FW,RW,Battery Level)

Feature & Specification
Frequency range: 125 - 525MHz
Measurable power range: 0.5 - 120W(+-0.5%)
Input  read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery

Not for the digital radio.

Interface: N-J Interface

Feature & Specification (for  version 2.02)
MAX. Power in 120 W        (Measurable power,Radio must be ANALOG)
V.S.W.R 1.00~19.99
Frequency Ranger COVER : 125MHz~525MHz
Insertion Loss < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature 0℃~60℃
Frequency counter Yes (  TX input  must be minimum 0.5W + - 0.5%)
Battery Display Yes
Battery Build-in 3.7V  Li-ion Battery 
Auto Power Off 1-9 mins
Size 66*68*37 (mm)
Charger in  5V (micro usb)
Backlight AUTO OFF  
Interface (in and out ) N(SL16)
Weight 220g (include battery)

 

  • Power ON/OFF:

Press 2 second the [Red button] to power on or power off



 

MENU Dispaly  (Note: Version for up to V2.02)
No. Mode Adj 
Default Setting
 Content
1 Adjustment Forward  -99  to  +99 0 Fine Tune Level %
2 Adjustment Reverse  -99  to  +99 0 Fine Tune Level %
3 Adjustment Time Base  -99  to  +99 0 Frequency Counter ,OSC Time Base
4 LCD DIM (Back Light  Time) 0-9 1 "0" is always on,  1 min  to  9 mins
5 POWER OFF 0-9 3 "0" is always on,  1 min  to  9 mins

* Supplier, the product will add functionality without having to give notice

 

  • Set & Save​:
  1. Press MENU [Blue button]
  2. Press F1 [Red button)(Select 1-5 Funtion)
  3. Press [Blue button] ( - ), [Yellow button] (+)
  4. Press the  [Red button ]for 2 seconds
  5. Press the  [Blue button] to SAVE and EXIT

 

  • How to check the S.W.R. of your Antenna :
    ​Connect to "TX" on Radio output  and Antenna  to "ANT".  Proper adaptor/cable is required if your device has different type of connectors.
  1. Measurement V.S.W.R. : (see Pic.1)
  2. SW-102 TX connect Radio RF out  
  3. Radio TX , SW-102 with display S.W.R. measure data.
    sw-102-how-to-swR
    Do not affect the test in the following cases, there are objects nearby, placed horizontally.
  • How to check the output Watt of your transceiver :
    Connect to "TX" on Radio output and dummy Load to "ANT".  Proper adaptor/cable is required if your device has different type of connectors.
  1. Measurement Power: (see Pic.2)
  2. SW-102 TX connect Radio RF out  
  3. SW-102 ANT connect 50 ohm Dummy Load
  4. Push Radio TX , SW-102 display is Power  measure data.
    (SW-102 is not for DMR system)

 

  • Package Contents
  • 1x SURECOM  SW-102-UV Power & SWR Meter  (N - connector) (New Version 2.02)
  • 1x USB Power PSU 100-240V
  • 1x Mirco usb charger Cable 
  • 1x English Users Manual
  • 1x 50w DUMMY LOAD 
  • **All Specifications are subject to change without notice 
    Anywhere to provide three years of free maintenance

We Also Recommend